Instruction Iron Ignitor

1. Initial Application (Dry Car): Spray Iron Ignitor generously on paint, wheels, or calipers.

2. Let it sit for 3-5 minutes as it reacts with iron particles, turning purple to show it’s working.

For heavily soiled areas, gently agitate with a soft brush.

3. Rinse with a pressure washer or strong hose spray to remove all product and contaminants.

Reapplication for Neglected Cars:

4. For heavily contaminated surfaces, spray Iron Ignitor on a wet car after rinsing. Agitate with a wash pad or microfiber towel to spread the product evenly, wait 2 more minutes, then rinse thoroughly.

5. Repeat as needed to achieve a fully decontaminated surface.

6. Rinse thoroughly and ensure the product does not dry on the surface.

Note:

Avoid applying in direct sunlight or on hot surface.
Do not let the product dry on surface; if it does, reapply and rinse immediately.
For bare (uncoated, unpainted, or unsealed) metal test in an inconspicuous area before full application.

Warning:

Use on cool surfaces, out of direct sunlight. Avoid drying on surfaces. Avoid contact with eyes and skin; rinse thoroughly if contact occurs. Do not ingest. Test on a small area first.

May cause an allergic skin reaction. Causes mild skin irritation. Causes eye irritation. Avoid breathing mist, vapors, or spray. Wear protective gloves.

IF ON SKIN: Wash with plenty of soap and water.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If symptoms persist, seek medical attention.

Keep out of reach of children.